Equipment configuration
Root washer, slicer, dryer and optional milling and sieving.
PROCESS SOLUTION
Ginger & Turmeric Drying Line
Prepare and dry fibrous rhizomes for sliced ingredients or downstream grinding.
Continuous / batchGingerTurmeric
QUICK TECHNICAL ANSWER
Project at a glance
- Operating mode
- Continuous / batch
- Raw materials
- Ginger, Turmeric
- Finished product
- Dried chips, slices or powder.
- Capacity
- Capacity Configured for Your Project
PROCESS
Process flow
- 01Wash and remove soil
- 02Trim and slice
- 03Optional material-specific pretreatment
- 04Drain
- 05Hot-air dry
- 06Cool and optionally grind
LINE CONFIGURATION
Equipment, layout and utilities
Plant layout
Allocate soil removal, drainage and dry-side segregation. Review staining and cleaning requirements.
Utility requirements
Confirm power, selected heat source, drainage and humid exhaust.
Investment factors
Drying duty, cleaning access, finish specification, automation and site work.
Configuration options
Compare manual and automated transfer, batch or continuous duty where applicable, and finishing modules.
Why this process
Consistent slice thickness helps avoid wet centers. Assess color and aroma after drying and milling.
CAPACITY OPTIONS
Plan the mass balance
Separate fresh feed, dry output and removed water. Allow for preparation losses, operating conditions and cleaning time.
EQUIPMENT & TESTING
Review the available evidence
Share a representative sample and confirm the trial protocol, measurement method and acceptance criteria with engineering.
View the evidence indexKEEP EXPLORING
Candidate drying equipment
QUESTIONS
Frequently asked questions
How should I specify the capacity?
Provide prepared fresh feed per hour or per batch, starting moisture and the dry product target. Clarify whether the feed is measured before or after trimming.
Which parts of the line are optional?
Root washer, slicer, dryer and optional milling and sieving.
What should I bring to a process trial?
Provide a representative raw material sample, intended cut and quality targets. Record the load, recipe and moisture measurements.
PROJECT INQUIRY
Let’s plan your drying project.
Tell us what you want to process. If you have a capacity target, moisture specification or layout, add it in the optional second step.
Start with your material.
Add project details when you’re ready.
Add project details when you’re ready.
Prefer to email drawings or specifications?
info@hadofmachinery.com