Equipment configuration
Peeling and cutting equipment, controlled drying and cooling. Add a mill, sieve and dust extraction where powder is specified.
PROCESS SOLUTION
Onion & Garlic Dehydration Line
Configure sliced onion or garlic dehydration with optional milling and screening for flakes, granules or powder.
Continuous / batchOnionGarlic
QUICK TECHNICAL ANSWER
Project at a glance
- Operating mode
- Continuous / batch
- Raw materials
- Onion, Garlic
- Finished product
- Dried slices or flakes, screened granules, or milled powder.
- Capacity
- Capacity Configured for Your Project
PROCESS
Process flow
- 01Peel and inspect
- 02Slice or dice
- 03Drain surface water
- 04Controlled hot-air drying
- 05Cool and sort
- 06Optional mill, sieve and pack
LINE CONFIGURATION
Equipment, layout and utilities
Plant layout
Separate strong-odor wet handling from the powder room. Size exhaust and dust collection around the selected process and site requirements.
Utility requirements
Confirm power, selected heat source, drainage and humid exhaust.
Investment factors
Drying duty, cleaning access, finish specification, automation and site work.
Configuration options
Compare manual and automated transfer, batch or continuous duty where applicable, and finishing modules.
Why this process
Color and aroma depend on cut size, air exposure and the drying profile. Verify moisture before grinding to avoid clumping.
CAPACITY OPTIONS
Plan the mass balance
Separate fresh feed, dry output and removed water. Allow for preparation losses, operating conditions and cleaning time.
EQUIPMENT & TESTING
Review the available evidence
Share a representative sample and confirm the trial protocol, measurement method and acceptance criteria with engineering.
View the evidence indexKEEP EXPLORING
Candidate drying equipment
QUESTIONS
Frequently asked questions
How should I specify the capacity?
Provide prepared fresh feed per hour or per batch, starting moisture and the dry product target. Clarify whether the feed is measured before or after trimming.
Which parts of the line are optional?
Peeling and cutting equipment, controlled drying and cooling. Add a mill, sieve and dust extraction where powder is specified.
What should I bring to a process trial?
Provide a representative raw material sample, intended cut and quality targets. Record the load, recipe and moisture measurements.
PROJECT INQUIRY
Let’s plan your drying project.
Tell us what you want to process. If you have a capacity target, moisture specification or layout, add it in the optional second step.
Start with your material.
Add project details when you’re ready.
Add project details when you’re ready.
Prefer to email drawings or specifications?
info@hadofmachinery.com